[FS] Sony TA-N80ES Mk1 Flagship Power Amp

jeudi 7 avril 2016

This is a nice example of one of Sony's best ever power amps. 25kg. Superlative sound quality (works very well with valve pre-amps too). All in good working order and physical condition bar one thing. The speaker terminals for the second set of 'B' speakers need to be replaced (see pic). Working fine but the placcy bits have detached. Hasn't bothered me at all as I use single-wired speakers.

£625 sounds about right. Pick up only from my place in Bedford please.

Description of these amps: http://ift.tt/1PWZwAO

Specifications

Frequency response :
1Hz...200Khz (+0 / -3dB)
System :
• Super Legato Linear
• Pure complementary SEPP
• STD power supply
• Dual protection circuits
• Triple p-p discrete output transistors
• G-Chassis
• Resin-cast power supply caps
• Fixed/variable inputs
Continuous RMS power :
2x 270W (4 Ohm, 20Hz...20Khz, THD 0,006%)
2x 230W (6 Ohm, 20Hz...20Khz, THD 0,005%)
2x 200W (8 Ohm, 20Hz...20Khz, THD 0,004%)
1x 610W (8 Ohm, mono, 20Hz...20Khz, THD 0,004%)
1x 580W (8 Ohm, mono, 20Hz...20Khz, THD 0,004%)
Dynamic power :
660W (1 Ohm)
800W (2 Ohm)
520W (4 Ohm)
370W (6 Ohm)
300W (8 Ohm)
Power bandwidth :
10Hz...100Khz (4 Ohm, THD 0,02%)
10Hz...100Khz (8 Ohm, THD 0,02%)
Dynamic headroom :
2,8dB (4 Ohm)
1,8dB (8 Ohm)
THD :
0,004% (10W / 4 Ohm)
0,003% (10W / 6 Ohm)
0,0018% (10W / 8 Ohm)
IMD :
0,006% (4 Ohm at rated output)
0,005% (6 Ohm at rated output)
0,004% (8 Ohm at rated output)

Damping factor :
100 (8 Ohm / 1Khz)
Slew rate :
150V /µsec
300V /µsec (inside)
Residual noise :
less than 35µV
S/N ratio :
120dB (A weighted, '78 IHF)
Inputs :
1V / 30kOhm (unbalanced)
0,5V / 600 Ohm (balanced)
PC :
380W (US)
510W (EU)
950VA (Canada)
Dimensions :
47 x 18,5 x 44cm (with wood-sides)
Weight :
25kg